Established in 2013, PV Global is the sales partner & appointed Authorised Service Centre (ASC) for Danfoss Power Solution’s (DPS) range of Open Circuit Hydraulics products.
151B3004
OMT 400 Low Speed High Torque motor, Geometric Displacement 410.9 cm3
SGD$ 1,337.51
Warning: Last items in stock!
Availability date:
OMS, OMT, and OMV are suitable for continuous operation under rough operating conditions: e.g. high pressure, thin oil, or frequent reversals. The tapered roller bearings on the output shaft make the motors suitable for absorbing static and dynamic radial loads. Besides the separately driven and hydraulically balanced disc valve, hydraulic and mechanical losses are reduced to a minimum. This gives the motors high efficiency - even at high pressures, and good starting characteristics.
If the application requires very smooth running at low speeds the choice of OMS, OMT, OMV or TMT is recommended
Cylindrical output shaft 40mm with 3/4 BSP port
Parallel key A12 x 8 x 70mm (DIN 6885) 682L8014
Accessories (not included):
1. Seal Kit 151B0113
Unit weight | 23.0kg |
Packing size | 44 x 24 x 17 cm |
Maximum Continuous Output Speed | 305 rpm |
Maximum Intermittent Output Speed | 365 rpm |
Maximum Continuous Output Torque | 1080Nm |
Maximum Intermittent Output Torque | 1260Nm |
OMT 160 Low Speed High Torque motor, Geometric Displacement 161.1 cm3
OMT 200 Low Speed High Torque motor, Geometric Displacement 201.4 cm3
OMT 250 Low Speed High Torque motor, Geometric Displacement 251.8 cm3
OMT 315 Low Speed High Torque motor, Geometric Displacement 326.3 cm3
OMT 500 Low Speed High Torque motor, Geometric Displacement 523.6 cm3
OMT 160 Low Speed High Torque motor, Geometric Displacement 161.1 cm3
OMT 200 Low Speed High Torque motor, Geometric Displacement 201.4 cm3
OMT 250 Low Speed High Torque motor, Geometric Displacement 251.8 cm3
OMT 315 Low Speed High Torque motor, Geometric Displacement 326.3 cm3
OMT 400 Low Speed High Torque motor, Geometric Displacement 410.9 cm3
OMT 500 Low Speed High Torque motor, Geometric Displacement 523.6 cm3
OMTS 160 Low Speed High Torque motor, Geometric Displacement 161.1 cm3
OMTS 200 Low Speed High Torque motor, Geometric Displacement 201.4 cm3
OMTS 250 Low Speed High Torque motor, Geometric Displacement 251.8 cm3
OMTS 315 Low Speed High Torque motor, Geometric Displacement 326.3 cm3
OMTS 400 Low Speed High Torque motor, Geometric Displacement 410.9 cm3
OMTS 500 Low Speed High Torque motor, Geometric Displacement 523.6 cm3
OMT 500 Low Speed High Torque motor, Geometric Displacement 523.6 cm3