Orbital Motor OMV500 - 151B3107
OMV 500 Low Speed High Torque motor, Geometric Displacement 499.6 cm3
OMS, OMT, and OMV are suitable for continuous operation under rough operating conditions: e.g. high pressure, thin oil, or frequent reversals. The tapered roller bearings on the output shaft make the motors suitable for absorbing static and dynamic radial loads. Besides the separately driven and hydraulically balanced disc valve, hydraulic and mechanical losses are reduced to a minimum. This gives the motors high efficiency - even at high pressures, and good starting characteristics.
If the application requires very smooth running at low speeds the choice of OMS, OMT, OMV or TMT is recommended
Splined 16T output shaft 2.125" with G1 BSP port
Splined Shaft ANS B92.1 - 1970 standard
Accessories (not included):
1. Seal Kit 151B0129
Data sheet
- Unit weight
- 33.5kg
- Packing size
- 44 x 24 x 22cm
- Maximum Continuous Output Speed
- 400 rpm
- Maximum Intermittent Output Speed
- 480 rpm
- Maximum Continuous Output Torque
- 1460Nm
- Maximum Intermittent Output Torque
- 1760Nm